Xiaomi Mi 10i EDL Test Point – Boot Mi 10 Into EDL 9008 Mode
n this tutorial, we’ll show you ways else Xiaomi Mi 10i into EDL mode 9008 using test points? Emergency downloading mode or 9008 mode is extremely important to unbrick Qualcomm MI 10i mobile.
There could also be a condition when your Xiaomi Mi 10i device was in boot loop condition or bricked, but the bootloader has not been still unlocked. This condition will force you to use the Test Point process. it might be impossible to unlock the bootloader because the device is boot looped or bricked.
If you happen to have an Android device running a Qualcomm processor likelihood is that that your device supports Emergency Download Mode aka EDL Mode. EDL mode may be a Qualcomm enabled feature, that’s useful to unbrick device, unlock bootloader or modify protected device parameters. However, not all Qualcomm-based devices support it.
What Is Xiaomi Mi 10i EDL Mode?
If you’re a replacement bie user then probably EDL mode could also be a new word for you. But if you’re involved in rooting and flashing firmware then absolutely not. In short, EDL mode is additionally referred to as an emergency mode for mobile. Technically all the Xiaomi devices accompany the EDL mode option. If you would like to put in or update your own Xiaomi phone then you’ve got many options to flash new stock ROM on the device using Recovery Mode or using fast boot mode.
Both methods have some limitations like Recovery ROM is often used only to update the upper version and you can’t downgrade the Huawei version. Just boot the device into EDL mode or emergency downloading mode and flash fastboot ROM /firmware using the Mi flash tool. it’ll fix all existing errors otherwise you can recovery your dead phone again.
Open back cover of dead Xiaomi Mi 10i. [You may do Google to level Mi 10i at home]
[Be careful at the time of removing the back cover of the device and confirm you’re not getting to damage any hardware of the device]
Once you’re ready to remove the back cover, disconnect the battery connector first. Battery not required for EDL mode.
Now remove the black tape to visible the edl points of Xiaomi Mi 10i as shown below.
Now EDL mode or Xiaomi Mi 10i edl test points are ahead of you. And you’ll use them to put in the firmware on Xiaomi Mi 10i without unlocking the bootloader.
So guys this is often all about Xiaomi Mi 10i emergency downloading mode or edl mode. Now you’ll find the Xiaomi Mi 10i test points easily.
Uses Of Xiaomi Mi 10i EDL Test Point
Install stock ROM on Xiaomi Mi 10i.
Flash Mi 10i without unlocking the bootloader. Bootloader unlocking permission not required.
Recovery dead Xiaomi Mi 10i by flashing firmware.
Install stock ROM easily, if the device isn’t ready to boot into fastboot mode or the device stuck on the Nokia logo.
Remove Xiaomi Mi 10i FRP Lock with no tool.
Note: It’s really must to know that EDL mode flashing may be a universal method for all Huawei devices. But EDL booting process could also be different for various devices. for a few devices, you’ll use the EDL boot command but the problem is that these days edl command doesn’t work for all the newest Huawei smartphones. therefore the test point is that the easiest and excellent method else any Nokia phone into edl mode using test terminals.
Hi, MY Name is Abdul im software engineer provide you softichnic.com all mobiles latest flash file to download for free and here you can learn about mobile flashing and unlocking.
